Table of Contents
Advertisement
If your system board package does not include the diskette, prepare
a blank formatted diskette then copy all the SATA driver files from
the SATA\DRIVERDISK directory of the provided CD into the blank
diskette. You can now use the diskette to install the drivers.
Note:
Refer to the VIA SATA RAID manual for information on using
the utility. The manual is included in the CD.
4.2.6 VIA Suspend Wakeup Patch Utility
To fully enable the USB wake up function, you must install the VIA
Suspend Wakeup Patch utility.
To install the utility:
1. In the USB RESUME FROM S3 directory of the CD, double-click
the "USB_Wake_up.reg" file.
2. Click "Yes". This will update the registry information.
You can now use the USB wake up function.
Supported Software
4
107
Advertisement
Table of Contents
