Table of Contents
Advertisement
3.1.5.3 Power Management Option
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the "HDD
Power Down" field is activated.
Min Saving
Minimum power saving time for the "HDD Power
Down" = 15 min.
Max Saving
Maximum power saving time for the "HDD Power
Down" = 1 min.
User Define
Allows you to set the power saving time in the
"HDD Power Down" field.
3.1.5.4 HDD Power Down
This is selectable only when the Power Management field is set to
User Define. When the system enters the HDD Power Down mode
according to the power saving time selected, the hard disk drive will
be powered down while all other devices remain active.
3.1.5.5 Suspend Mode
This is configurable only when the Power Management field is set to
"User Define". When the system enters the power saving time set in
this field, the CPU and onboard peripherals will be shut off.
3.1.5.6 Video Off Option
Always On
Suspend -> Off
3.1.5.7 Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This selection will cause the system to turn
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initializes display power management signaling. Use
this option if your video board supports it.
The system BIOS will never turn off the screen.
The screen is off when the system is in the
Suspend mode.
off the vertical and horizontal synchronization
ports and write blanks to the video buffer.
3
BIOS Setup
75
Advertisement
Table of Contents
