Table of Contents
Advertisement
3.1.3.3 LDT & PCI Bus Control
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
Upstream LDT Bus Width
This field is used to select the upstream data width. The options are
8 bit and 16 bit.
Downstream LDT Bus Width
This field is used to select the downstream data width. The options
are 8 bit and 16 bit.
LDT Bus Frequency
This field is used to select the LDT bus frequency. The options are
Auto, 200MHz, 400MHz, 600MHz and 800MHz.
PCI1 Master 0 WS Write and PCI2 Master 0 WS Write
When enabled, writes to the PCI bus are executed with zero wait
state.
PCI1 Post Write and PCI2 Post Write
The options are Enabled and Disabled.
3
BIOS Setup
65
Advertisement
Table of Contents
