Table of Contents
Advertisement
3
BIOS Setup
3.1.5.8 MODEM Use IRQ
This field is used to set an IRQ channel for the modem installed in
your system.
3.1.5.9 Soft-Off by PWRBTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec. Regardless of whether the Power Management func-
Instant-Off
3.1.5.10 Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if
the "ACPI Suspend Type" field is set to "S3(STR)".
3.1.5.11 AMD K8 Cool 'n' Quiet Control
Auto
Disabled
3.1.5.12 Hammer Fid Control
This field is used to manually select the CPU's operating frequency.
3.1.5.13 Hammer Vid Control
This field is used to manually select the CPU's voltage.
76
tion is enabled or disabled, if the power button is
pushed and released in less than 4 sec, the system
enters the Suspend mode. The purpose of this
function is to prevent the system from powering off
in case you accidentally "hit" or pushed the power
button. Push and release again in less than 4 sec to
restore. Pushing the power button for more than 4
seconds will power off the system.
Pressing and then releasing the power button at
once will immediately power off your system.
Enables the AMD Cool'n'Quiet
function allows the system to detect the CPU's tasks
and utilization status. When the CPU's task slows
down, the system
effectively lower s power
consumption by lowering its CPU speed and voltage,
subsequently decreasing its noise level.
Disables the AMD Cool'n'Quiet
TM
technology. This
TM
technology.
Advertisement
Table of Contents
