Table of Contents
Advertisement
2.5.5 Universal Serial Bus Ports
USB 2
USB 1
USB 4
USB 3
Four onboard USB 2.0/1.1 ports (Black) are at locations CN6 (USB
1-2) and CN5 (USB 3-4) of the system board.
J7 (USB 5-6) and J8 (USB 7-8) connectors allow you to connect 4
additional USB 2.0/1.1 ports. The USB ports may be mounted on a
card-edge bracket. Install the card-edge bracket to the system
chassis then insert the connector that is attached to the USB port
cables to J7 or J8.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
("VIA OnChip PCI Device" section) of the BIOS. Refer to chapter 3
for more information.
Hardware Installation
USB 5-6
USB 7-8
2
1 0
2
9
1
33
Advertisement
Table of Contents
