Mercedes-Benz COMAND control panel Operating Instructions Manual page 74

Route guidance
72
To delete the blocked section: select
X
Delete while the message is shown and
press W to confirm.
COMAND calculates the route without the
block.
Selecting an alternative route
With the "Alternative route" function, routes
other than the original one can be calculated.
To switch on navigation mode: press the
X
g function button.
To show the menu: press W the COMAND
X
controller.
Select Route in the navigation system
X
menu bar by turning cVd the COMAND
controller and press W to confirm.
Select Alternative Route
X
to confirm.
You see the selected route. The display now
shows a split-screen view. On the left-hand
side, one or more alternative routes are
shown from start to destination. The
current route is highlighted dark blue; other
alternative routes appear light blue.
To select the next or previous
X
alternative route: select
Previous and press W to confirm.
To select the original route: select
X
a corresponding number of times and press
W to confirm.
To start route guidance using the
X
selected alternative route: select
and press W to confirm.
COMAND calculates the alternative route.
Displaying destination information
You have entered a destination (
or a point of interest (
an intermediate stop (
and press W
Next or
Back
Start
page 51)
Y
page 61) and possibly
Y
page 59).
Y
To switch on navigation mode: press the
X
g function button.
To show the menu: press W the COMAND
X
controller.
Select Route in the navigation system
X
menu bar by turning cVd the COMAND
controller and press W to confirm.
Select Destination Information
X
press W to confirm.
Destination information is displayed.
Destination information (example)
Distance, estimated time of arrival and
:
estimated remaining driving time to
intermediate stop
Intermediate stop P
;
State and city
=
Destination O
?
Distance to destination, estimated time of
A
arrival and estimated remaining driving
time
To close the destination information:
X
slide XVY the COMAND controller or press
the k back button.
Route overview
You can use the route overview to move along
the route section by section and view
information and details about each section of
the route.
and