Mercedes-Benz COMAND control panel Operating Instructions Manual page 103

meantime. In this case, start a new search
to update the Bluetooth
Authorizing (registering) a mobile
phone
®
In the Bluetooth telephones list, select the
X
not yet authorized mobile phone by turning
cVd the COMAND controller.
Select Options by sliding VY the
X
COMAND controller and press W to
confirm.
Select Authorize and press W to confirm.
X
The passcode entry menu appears.
The passcode is any one to sixteen-digit
number combination which you can choose
yourself. You must enter the same number
combination in COMAND and in the
®
Bluetooth -capable mobile phone (see the
operating instructions of the mobile phone).
i
Some mobile phones require a passcode
with four or more digits.
If you want to reauthorize a mobile phone
following de-authorization, you can select a
different passcode.
To enter a passcode in COMAND: press
X
the number keys in turn.
¬ is highlighted after the first number
has been entered.
or
Select the digits in the digit bar one by one
X
by turning cVd the COMAND controller
and press W to confirm. Then, select
¬.
Telephony via the Bluetooth
To confirm an entry in COMAND: press
X
® W the COMAND controller.
telephone list.
Now enter the same passcode in the mobile
X
phone.
To make entries on the mobile phone: if
the Bluetooth
will be requested to enter the passcode
(access code, passkey) (see the mobile phone
operating instructions).
Enter the same passcode in the mobile
X
phone as already entered in COMAND.
i
need to enter a confirmation in your mobile
phone to connect calls. Please check your
mobile phone display.
If the COMAND display shows the
message:
Unsuccessful, you may have exceeded
the prescribed time period. Repeat the
procedure.
The mobile phone is connected to COMAND
(authorized). You can now make calls using
the COMAND hands-free system.
External authorization
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. In this case,
you can test if your mobile phone can find
COMAND. The Bluetooth
COMAND is
Observe the following: some mobile phones
require that you reconnect to COMAND after
you have entered the passcode (see the
mobile phone operating instructions). The
mobile phone cannot otherwise be
authorized.
Press the ÷ function button on COMAND.
X
Select
X
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
® connection is successful, you
After entering the passcode, you may also
Authorization Procedure
®
device name of
MB Bluetooth.
Phone in the telephone basic menu
®
interface
101
Z