Comand Features; Display Settings; Time Settings - Mercedes-Benz COMAND control panel Operating Instructions Manual

Time settings

38

COMAND features

These Operating Instructions describe all
standard and optional equipment available
for your COMAND system at the time of
purchase. Country-specific deviations are
possible. Please note that your COMAND
system may not be equipped with all the
features described.

Display settings

Setting the brightness
The brightness detected by the COMAND
light sensor affects the setting options for this
function.
Press the S button.
X
Select Settings
X
COMAND controller and press W to
confirm.
Select Display and press W to confirm.
X
Select Brightness
X
confirm.
The needle shows the current setting
:
Adjust the brightness by turning cVd the
X
COMAND controller and press W to
confirm.
Display design
Your COMAND display features optimized
designs for operation during daytime and
by turning cVd the
and press W to
night-time hours. You can customize the
design to suit your personal preferences by
manually selecting day or night design or opt
for an automatic setting.
Press the S button.
X
Select Settings by turning cVd the
X
COMAND controller and press W to
confirm.
Select Display and press W to confirm.
X
Select Day Mode, Night Mode
X
Automatic by turning cVd the COMAND
controller and press W to confirm.
The dot in front of the entry indicates the
currently selected setting.
Design Explanation
The display is set
Day Mode
permanently to day
design.
Night Mode The display is set
permanently to night
design.
Automatic The display design
changes depending on
the vehicle instrument
cluster illumination.
i
When the Automatic
COMAND evaluates the readings from the
automatic vehicle light sensor and
switches between the display designs
automatically.
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
also adjust the time yourself in 30-minute
increments, but the date cannot be changed.
or
setting is selected,