Mercedes-Benz COMAND control panel Operating Instructions Manual page 130

Audio CD/DVD and MP3 mode
128
Disc name (only if stored on the disc)
=
Current disc
?
Select a magazine tray containing a disc by
X
turning cVd the COMAND controller and
press W to confirm.
or
Press a number key, e.g. :.
X
You see the Ejecting Disc <x>...
message. You then see the following
message.
Take the disc out of the slot.
X
If you do not take the disc out of the slot,
COMAND will draw it in again automatically
after a short while and load it again.
To eject all CDs/DVDs: press the 8
X
load/eject button.
The magazine menu appears.
Confirm Eject All by pressing W.
X
The DVD changer ejects the last disc
selected. The message
<x>... appears.
Take the disc out of the disc slot when you
X
see the Please Remove Disc <x>
message.
The DVD changer switches to the next
loaded magazine tray and ejects the disc.
Repeat the last step until the magazine is
X
empty.
To cancel ejecting: press the 8 eject/
X
load button again or press the k button.
or
Select Back by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
Inserting and ejecting a PCMCIA
memory card
General information
COMAND supports 16-bit full-size type I and
II PCMCIA memory cards.
i
Not all commercially available PCMCIA
memory cards and storage media are
designed for the temperatures which may
be reached in the vehicle.
If you are no longer using the PCMCIA
memory card, you should remove it from
COMAND, as high temperatures could
damage the card.
Ejecting Disc