Mercedes-Benz COMAND control panel Operating Instructions Manual page 71

right announcement is made 90 ft. before
the change of direction. The display is split
into two halves, as in the announcement
phase.
Example display: change-of-direction phase
Current vehicle position: the tip of the
:
triangle indicates the vehicle's direction
of travel
Graphic representation of the distance to
;
the next change of direction
Distance to the next change of direction
=
Once the change of direction is completed,
COMAND automatically switches back to full-
screen display.
Example of a display without changes
of direction
Route (highlighted in blue)
:
Current vehicle position
;
Current road
=
Map orientation selected
?
Map scale selected
A
Route guidance
Lane recommendations
Overview
On multilane roads, COMAND can display
lane recommendations for the next change of
direction. The corresponding data must be
available in the digital map.
COMAND displays lane recommendations
B, based on the next two changes of
direction. The number of lanes applies to the
point at which the next change of direction is
required.
Example display
Point of the next change in direction (light
:
blue circle)
Point of the change of direction after next
;
Next change of direction (in this case, turn
=
off to the right)
Graphic representation of the distance to
?
the next change of direction
Distance to the next change of direction
A
Recommended lane (dark blue)
B
Possible lane (light blue)
C
Lane not recommended (gray)
D
Current vehicle position: the tip of the
E
triangle indicates the vehicle's direction
of travel
69
Z