Mercedes-Benz COMAND control panel Operating Instructions Manual page 135

Current folder name
:
Track symbol
;
Current track
=
Symbol for next folder up
?
To switch to the superordinate folder:
X
select icon : and press W to confirm.
Disc name (if stored on the disc)
:
Current folder
;
Folder icon
=
Select the folder by turning cVd and press
X
W to confirm.
You will see the tracks in the folder.
Select the track by turning cVd and press
X
W to confirm.
The track is played and the corresponding
folder is now the active folder.
Audio CD/DVD and MP3 mode
Gracenote Media Database
Introduction
This function is only available in audio CD
mode.
There is a version of the software from
®
Gracenote , Emeryville, California, USA on
the hard disk. You will recognize this by the
logo which can be seen in the bottom right-
hand corner of certain audio displays.
Many audio CDs contain CD text. COMAND
uses the information contained therein to
display the artist, album and track name.
If the audio CD does not contain any CD text
information, COMAND can use the Gracenote
Media Database to identify unknown audio
tracks when running in audio CD mode. This
is only possible if the relevant information is
saved in the Gracenote Media Database and
if the "Gracenote Media Database" function
is activated.
If this is the case, COMAND will display the
corresponding data such as artist, album and
track name in the relevant displays and lists.
If COMAND accesses the Gracenote Media
Database when reading an audio CD, you will
see the following message:
133
Z