Mercedes-Benz COMAND control panel Operating Instructions Manual page 109

Select the characters of the entry you are
X
searching for one by one and press W to
confirm.
When the selection is clear, COMAND
switches automatically to the selection list.
To complete the search: switch from the
X
phone book with the character bar to the
selection list ( page 107).
Y
The last list entry is automatically
highlighted.
With number keypad
Alternatively, you can also enter digits using
the number keypad (direct entry)
( page 28).
Y
Deleting characters
To delete an individual character: select
X
the 2 symbol by turning cVd the
COMAND controller and press W briefly.
or
Briefly press the 2 button
X
Each time a character is deleted, the entry
most closely resembling the remaining
characters is shown at the top of the list.
To delete an entry: select the 2
X
symbol by turning cVd the COMAND
controller and press W until the entry is
deleted.
or
Press and hold the 2 button until the
X
entire entry is deleted.
Changing the language of the character
bar
Select B.
X
The language is switched.
X
Using the phone book
Changing the character set of the
character bar
Select p and press W to confirm.
X
The character set changes each time you
make this selection.
Selecting an entry directly from the list
You can switch to the list at any time during
character entry.
Slide VZ the COMAND controller
X
repeatedly or press and hold W until the
character bar disappears.
or
Select ¬ and press W to confirm.
X
To select an entry: turn cVd the
X
COMAND controller until the desired entry
is highlighted and press W to confirm.
To select a phone number: the G icon
indicates that an entry contains more than
one phone number.
Select a phone book entry with the G icon
X
and press W to confirm.
The sub-entries appear. The G icon
changes to I.
Expanded address book entry
:
Address book entry with sub-entries
;
Select a sub-entry by turning cVd and
X
press W to confirm.
107
Z