Mercedes-Benz COMAND control panel Operating Instructions Manual page 102

Telephony via the Bluetooth
100
function (see the mobile phone operating
instructions).
®
Bluetooth device name
X
®
Every Bluetooth
®
Bluetooth device name. This device name
is freely definable, but can be identical for
all devices from the same manufacturer. It
is therefore recommended that you change
this name so that you can easily recognize
your mobile phone (see the mobile phone
operating instructions).
Switch on the mobile phone and enter the
X
PIN when prompted to do so (see the
mobile phone operating instructions).
Activate Bluetooth
X
necessary, Bluetooth
mobile phone (see the mobile phone
operating instructions).
On COMAND
Activate the Bluetooth
X
COMAND ( page 42).
Y
Connecting a mobile phone
General information
Before using your mobile phone with
COMAND for the first time, you will need to
connect it.
When you authorize a new mobile phone, it is
connected automatically.
Connecting comprises:
R searching for a Bluetooth
phone
subsequently authorizing it
R
You can connect up to ten mobile phones.
Searching for a mobile phone
Press the ÷ function button in COMAND.
X
Select Phone in the telephone basic menu
X
by sliding VÆ and turning cVd the
®
interface
device has its own
®
functions and, where
®
visibility on the
®
function in
®
-capable mobile
COMAND controller and press W to
confirm.
Select Bluetooth Phones
X
confirm.
Select Update and press W to confirm.
X
COMAND searches for Bluetooth
telephones within range and adds them to
®
the Bluetooth telephone list.
The duration of the search depends on the
®
number of Bluetooth
range and their characteristics.
Example of display: Bluetooth
Currently connected # and authorized
:
mobile phone Y
Mobile phone not within range but
;
previously authorized (L appears in gray)
Newly detected mobile phone within
=
range but not yet authorized (no icon yet
Y)
®
The Bluetooth telephones list shows all
mobile phones within range and all previously
authorized mobile phones, whether or not
they are in range.
i
®
If the Bluetooth telephones list is full,
you will be requested to de-authorize a
mobile phone ( page 102). If COMAND
Y
does not find your mobile phone, external
authorization ( page 101) may be
Y
necessary.
i
When called up again, the telephone list
may no longer show all mobile phones
because, for example, a mobile phone has
been removed from the vehicle in the
and press W to
®
telephones within
®
telephones list