Mercedes-Benz COMAND control panel Operating Instructions Manual page 101

slide XVY or ZVÆ.
press W.
pressing the K or I button and using the
R
telephone keypad on COMAND
pressing the 6 or ~ button on the
R
multifunction steering wheel
using Voice Control (see the separate Voice
R
Control System instructions)
Unless stated otherwise, the descriptions and
illustrations in this section refer to COMAND.
Function restrictions
The telephone is not ready for use in the
following situations:
the telephone automatically tries to log on
R
to a network. If no network is available, you
will not be able to make a "911" emergency
call. If you attempt to make an outgoing
call, the No Service message will appear
for a short while.
911 emergency call
G
WARNING
The 911 emergency call system is a public
service. Using it without due cause is a
criminal offense.
The following requirements must be fulfilled
for a 911 emergency call:
the mobile phone must be switched on.
R
a network must be available.
R
a valid and operational SIM card must be
R
inserted in the mobile phone.
the mobile phone is connected to COMAND
R
®
via Bluetooth .
If you cannot make an emergency call, you
must arrange rescue measures yourself.
Telephony via the Bluetooth
Enter numbers on COMAND (
X
Press the K button.
X
The telephone makes the connection.
Wait for the emergency call center to
X
respond and then describe the emergency.
Telephony via the Bluetooth
interface
Conditions
On the mobile phone
For telephony via COMAND's Bluetooth
interface, a Bluetooth
phone is required.
i
Not all mobile phones available on the
market are equally suitable. More detailed
information on suitable mobile phones and
on connecting Bluetooth
phones with COMAND can be found on the
Internet at
http://www.mbusa-mobile.com. Or call
the Mercedes-Benz Customer Assistance
Center at
1-800-FOR-MERCedes(1-800-367-6372)
(for the USA) or Customer Relations at
1-800-387-0100 (for Canada).
The battery of the mobile phone should
always be kept sufficiently charged in order
to prevent malfunctions.
In preparation for telephoning via the
Bluetooth ® interface, you should check the
following items on your mobile phone (see the
mobile phone operating instructions):
Hands-Free Profile
X
The mobile phone must support Hands-
Free Profile 1.0 or above.
i
Some displays (e.g. the signal strength)
depend on the supported version of the
Hands-Free Profile.
®
Bluetooth visibility
X
On certain mobile phones, the device itself
must be made "visible" for other devices,
as well as activating the Bluetooth
®
interface
page 104).
Y
®
®
®
-capable mobile
®
-capable mobile
®
Z
99