Mercedes-Benz COMAND control panel Operating Instructions Manual page 32

Operating COMAND
30
The character bar offers characters
corresponding to the respective data field
(letters or digits).
To switch the character bar to upper-
:
case/lower-case letters
To switch the character bar from upper/
;
lower-case letters to digits
To change the language of the character
=
bar
To delete a character/an entry
?
Select c and confirm by pressing W the
X
COMAND controller.
The letter c is added to
Repeat this step until the name is fully
X
entered.
To enter a phone number: select the
X
digits one by one in the corresponding data
field by turning cVd and sliding ZVÆ the
COMAND controller and press W to
confirm.
Switching data fields
If you want to enter a first name after you have
entered a surname, for example, proceed as
follows to switch between the data fields:
Option 1
Select 4 or 5 in the character bar and
X
press W to confirm.
The input menu shows the data field
selected.
:
;
=
Option 2
Slide ZV the COMAND controller
X
repeatedly until the character bar
disappears.
Select the data field by sliding ZVÆ and
X
press W to confirm.
Storing an entry
Select ¬ in the character bar by turning
S in the data field.
X
cVd the COMAND controller and press
W to confirm.
The entry is stored in the address book.
Further functions available in the
character bar
To switch the character bar to upper/
X
lower-case characters: select * or
E and press W to confirm.
To switch the character set: select
X
p and press W to confirm.
The character set switches between
upper/lower-case letters and digits.
To change the language of the
X
character bar: select B.
Select the language by turning cVd the
X
COMAND controller and press W to
confirm.
Cursor in the next data field
To store an entry
4 and 5 icons to select a data field