Porsche 911 GT3 R 2012 Technical Manual page 78

Porsche Motorsport parts sales offers a cord alignment tool:
997.450.351.90
Bracket front left:
Bracket front r ight:
The following points must be followed before alignment can begin:
Set the front and rear tyr

set-up wheels are used their dimensions must correspond with
the tyre dimensions at the r
 Measure the wheel alignment, including camb
height and corner weights with th
appropriate driver ballas
 Put the car on the corner-we
 The suspension s pherical bearings and
be checked (wheel bearing play cannot be adjusted) and replaced
where necessary.
Place all four wheels on the swivel plates.

 Lock the steering in the straight ahead position. Check that the
steering wheel lock from left to right is equal when the steering
wheel is in the straight ahead position.
 Measuring wheels: See parts catalogue
997.450.561.90
997.450.562.90
e pressures to hot running pressure, if
elevant tyre pressure
e fuel cell half full and the
t placed in the driver's s
ight scales.
wheel bearing play m
er, toe-in, ride
eat.
ust
75