Table of Contents
Advertisement
5.4.6.
Emergency Mode (EM)
5.4.7.
Diagnosis
MoTec warning
shift press ml
gear poti ml
comp temp ml
The emergency mode should only be activated for function check
purposes when the car is stationary (gearbox check by mechanics). When
the emergency mode is active the LEDs shown below blink in the gear
shift display module as warning.
All safety functions are deactivated when the Emergency Mode is
active!
When shifting gear in Emergency Mode the car must be moved and/or
the rear wheels rotated manually!
In the event of a system malfunction this is indicated by the shift light
module above the MoTec display. The function 'Warning Light' is
activated, both outermost LEDs blink orange and one of the following
three messages is shown in the display:
Explanation
Effect
Pressure in
Can lead to system
accumulator too
failure
low (<6 bar)
No immediate
Potentiometer
restrictions (gear is
error
calculated in event of
sensor malfunction)
Compressor
Can lead to system
temperature too
failure
high (>50°C)
Possible
Action
cause
Accumulator
leak,
compressor
Delete errors
defect
with 'Alarm'
Potentiometer
button on
damaged
steering wheel
mechanically
and inform pit
and/or
crew
electrically
Fan is not
activated (relay
defect)
49
Advertisement
Table of Contents
