Date/Time - Gigaset A510IP User Manual

First steps
Screen display
u
Reception between the base and the handset:
– Good to poor:
– No reception:
If Eco Mode+
u
Charge status of the batteries:
– U Charged over 66%
– V Charged between 34% and 66%
– e Charged between 11% and 33%
– = Charged below 11%
– = Flashes: battery almost empty (less than 10 minutes talktime)
=
–
u
INT 1
Internal name of the handset
Please note
To protect your phone and its system settings from unauthorised access, you
can define a 4-digit number code (system PIN) known only to yourself. This code
must be entered before you can register/de-register handsets or alter your
phone's VoIP or LAN settings.
The default system PIN is 0000 (4 x zero).
For instructions on changing the PIN

Date/time

There are two methods of setting the date and time:
u
By default, your phone is configured so that the date and time are transferred
from a time server on the Internet, provided it is connected to the Internet.
You can activate/deactivate the synchronisation with a time server via the Web
configurator
u
You can also set the date and time manually via the menu of one of the regis-
tered handsets
To ensure you have the correct time, for example, for incoming calls, in the call lists
and other lists and to use the alarm clock, the date and time must be set.
34
Ð ¨ § ¦
¥
is activated, ¼ is displayed.
(page 93)
e V V Illuminated: batteries charging
(page 100)
¢
( page 138).
¢
( page 107).
¢
page 108.
Ð
U
INT 1
12.09. 10:53
Redial Menu