Checking The Base Mac Address - Gigaset A510IP User Manual

Setting the base
Resetting the base using the button on the base
As with resetting the base via the menu, all individual settings are reset. The system
PIN is also reset to 0000 and all handsets registered above and beyond the
scope of delivery will be de-registered.
Please note
For instructions on re-registering the handsets after a reset (where applicable)
¢
page
¤
Remove the cable connections from the base to the router
fixed line
¤
Remove the base power adapter from the socket
¤
Press and hold the registration/paging button
¤
Plug the power adapter back into the power socket.
¤
Press and hold the registration/paging button (at least 10 seconds).
¤
Release the registration/paging button. The base has now been reset.

Checking the base MAC address

Depending on your network configuration, you may have to enter your base MAC
address in your router's access control list, for example. You can check the MAC
address on the handset.
In idle status:
§Menu§
P#Q5# 2 Q
§Back§
114
96.
¢
( page 19).
Open menu.
Press keys in sequence. The MAC address is displayed.
Return to idle status.
¢
( page 21)
¢
( page 19).
¢
( page 9).
and