Connection Wizard - Gigaset A510IP User Manual

2. Connection wizard

The connection wizard enables you to assign previously configured connections
(fixed line connection, Gigaset.net and VoIP connections,
¢
page 24) to the registered handsets as receive and, if applicable, as send con-
nections.
u
Receive connections are the phone numbers (connections) on which you can
be called. Incoming calls are only forwarded to the handsets for which the rele-
vant connection is assigned as receive connection.
u
Send connections are the connections that you use to conduct external calls.
The network provider calculates charges based on the send connections. You
can assign a connection to each handset as a send connection permanently.
u
Each connection (number) of your phone can be both a send as well as a receive
connection. You can assign each connection to several internal parties as a send
and/or receive connection.
Default assignment
All configured connections are assigned to the handsets as receive connections
and the fixed line connection as send connection at registration/start-up.
Launching the connection wizard
a.
Assign connect.
to ?
No
b.
INT 1
receiv. calls for
Phone
Change
¶
¤
¤
Yes
The receive connections currently
assigned to the handset are displayed.
You have to press down on the control
key s to scroll through the list.
¤
¤
V
OK
¢
page 50
Press the display key
change the setting for the send and
receive connections of the handset
with the internal name INT 1.
Press the display key
wish to change the setting for this
handset.
Press the display key
wish to change the receive connec-
tion setting.
Press the display key
wish to change assignment of the
receive connections.
First steps
and
§Yes§
if you wish to
§No§
if you do not
§Change§
if you
§OK§
if you do not
31