Activating/Deactivating Auto Answer; Changing The Handsfree/Earpiece Volume - Gigaset A510IP User Manual

The selected function is displayed in the bottom display line above the display key.
To start the function, you then simply need to press the button. In idle status noth-
ing is displayed with the left display key if the handset is out of range of the base or
the base is not connected to the mains power supply.
Starting a function
When the handset is in idle status:
¤
Press the display key briefly.
The submenu opens and the function is performed.

Activating/deactivating auto answer

If you activate this function, when you receive a call you can simply lift the handset
out of the charging cradle without having to press the talk key c.
¤
§Menu§
§OK§

Changing the handsfree/earpiece volume

You can set the volume for handsfree mode and earpiece mode to five different lev-
els.
In idle status:
¤
t
Call Volume
Earpiece Volume / Handsfree Volume
q
§OK§
During a call via the earpiece or in handsfree mode:
t
The setting will automatically be saved after approximately 3 seconds or press the
display key
Please note
You can also set the call volume using the
¤
Menu§
¤
Settings Telephony
Press the display key (³ = on).
Select and press
Set the volume (e.g., volume 3 =
Press the display key to save the setting.
Press the control key to open the menu for setting the volume. Set the
earpiece or handsfree volume by pressing q.
§OK§
.
¤
Settings Audio Settings menu.
¤
Auto Answer
§OK§
.
‰
).
Handset settings
103