Using The Handset As An Alarm Clock - Gigaset A510IP User Manual

Using the handset as an alarm clock

Prerequisite: The date and time have already been set
Activating/deactivating the alarm clock
¤
§Menu§
After you activate the alarm clock, the menu for setting the wake-up time opens
automatically.
The ¼ icon and wake up time are shown on the display.
A wake up call is signalled on the display
volume and melody
is pressed, the wake up call is repeated twice at five minute intervals and then
switched off.
During a call, the wake-up call is only signalled by a short tone.
Setting the wake-up time
¤
§Menu§
~
Deactivating the wake-up call/repeating after a pause
(snooze mode)
Prerequisite: A wake-up call is sounding.
§Off§
Or
§Snooze§
¤
Alarm Clock Activation (
(page 104). The wake up call sounds for 60 seconds. If no key
¤
Alarm Clock Wake up time
Enter the wake up time in hours and minutes, then press
Press the display key. The wake-up call is deactivated.
Press the display key or any key. The wake-up call is deactivated and
then repeated after 5 minutes. After the second repetition the wake-up
call is deactivated completely.
Using the handset as an alarm clock
(page
³
= on)
¢
( page 7), with the selected ringtone
34).
§OK§
.
95