Gigaset A510IP User Manual page 158

Service Centres (Midde East)
Status
code
0x414 URI is too long.
0x415 Query format is not supported.
0x416 URI is faulty.
0x420 Incorrect ending
0x421 Incorrect ending
0x423 The requested service is not supported by the VoIP provider.
0x480 The dialled number is temporarily unavailable.
0x481 The recipient is not available.
0x482 Double service query
0x483 Too many "jumps":
0x484 Wrong number:
0x485 The URI dialled is not unique and cannot be processed by the VoIP provider.
0x486 The called party is busy.
0x487 General faults:
0x488 The server cannot process the query because the data entered in the media
0x491 The server reports that the query will be processed as soon as a previous query has
0x493 The server rejects the query because the phone cannot decrypt the message. The
0x500 The proxy or the receiving device has discovered a fault while executing the query.
0x501 The query cannot be processed by the recipient because the recipient does not
0x502 In this case, the receiving device that transmits this error code is a proxy or a gate-
156
Meaning
The query was rejected because the service server (proxy) has decided that this
query has already passed through too many service servers. The maximum number
is defined beforehand by the original sender of the query.
In most cases this response means that you have simply omitted one or more digits
in the phone number.
The call was cancelled before a call was established. The status code confirms
receipt of the interruption signal.
description is not compatible.
been completed.
sender has used an encryption method that either the server or the receiver phone
cannot decrypt.
It is therefore impossible to execute the query. If this occurs, the caller or the phone
displays the fault and repeats the query after a few seconds. The number of seconds
after which the query can be repeated may be transmitted to the caller or phone by
the receiving device.
have the functionality that the caller requires. If the recipient understands the
query but does not process it because the sender does not have the necessary
rights or the query is not permitted in the current context, status code 405 is trans-
mitted instead of 501.
way and has received an invalid response from its gateway via which this query is
to be processed.