Using Multiple Handsets; Registering Handsets - Gigaset A510IP User Manual

Using multiple handsets

Using multiple handsets

Registering handsets

You can register up to six handsets with your base station. Each additional handset
must be registered with the base in order for it to work properly!
Each registered device is assigned an internal number (1 - 6) and an internal name
(INT 1 – INT 6). You can change the names.
When you register a Gigaset handset, the base transfers entries for the following
online directories to the local directory on the handset to enable you to use the
online directories on your new handset as well.
Prerequisite: The handset can send and receive directory entries (see handset user
manual).
u
The currently set online directory
u
The Yellow Pages currently set
u
The private directory currently set with the name Prv.NetDir.
u
The Gigaset.net directory with the name Gigaset.net.
Registering a Gigaset handset to a Gigaset A510 IP
You must manual initiate registration of the handset on the base (1) and on the
handset (2).
Once registration is complete, the handset returns to idle status. The handset's
internal number is shown on the display, e.g., INT 1. If not, repeat the procedure.
1) On the base
¤
Within 60 seconds, press and hold the register/paging key on the base
¢
( page
2) On the handset
¤
§Menu§
~
The display shows Handset is registering.
Registering other handsets
You can manually register other Gigaset handsets and handsets for other devices
with GAP functionality as follows.
1) On the base
¤
Press and hold the register/paging key on the base (
(approx. 3 sec.).
2) On the handset
¤
Start to register the handset as described in its user guide.
96
9) (for approx. 3 seconds).
¤
Settings Registration
If required, enter the system PIN for the base (the default is 0000) and
§OK§
press .
¢
( page 138) with a provider-specific name.
¢
( page 138) with a provider-specific name.
¤
Register Handset
¢
page 9)