Main Specifications; System Requirements For Usb Connection - Roland EGX-350 User Manual

Main Specifications

Workpiece-table size
X, Y, and Z operation strokes
X-, Y-, and Z-axis drive system
Operating speed
Software resolution
Mechanical resolution
Spindle motor
Spindle speed
Tool chuck
Loadable workpiece thickness
Interface
Internal memory capacity
Control command set
Required power-supply amperage
Power consumption
Operating noise
External dimensions
Weight
Installation Environment
Included items

System Requirements for USB Connection

Computer
USB cable
Width x depth: 305 x 230 mm (12 x 9.1 in.)
X, Y, and Z: 305 x 230 x 40 mm (12 x 9.1 x 1.6 in.)
Stepping motor, 3-axis simultaneous control
X and Y axes: 0.1 to 60 mm/sec. (0.004 to 2.4 in./sec)
Z axis: 0.1 to 30 mm/sec. (0.004 to 1.2 in./sec)
0.01 mm/step or 0.025 mm/step (0.0004 in./step or 0.001 in./step)
X and Y axes: 0.0025 mm/step (0.0001 in./step)
Z axis: 0.00125 mm/step (0.00005 in./step)
brushless DC motor, maximum 50 W
5,000 to 20,000 rpm
Cutter holder, collet method
Maximum 40 mm (1.6 in.) (38 mm (1.5in.)when nose unit is used)
USB (compliant with Universal Serial Bus Specification Revision 1.1)
Serial (RS-232C-compliant)
2 MB
RML-1
Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvolt-
age category II, IEC 60664-1)
Required power capacity: 1.3 A (100 to 120 V)/0.6 A (220 to 240 V)
122 W
During operation: 60 dB(A) or less (when not cutting), during standby: 40
dB(A) or less
Height x width x depth: 393 x 616 x 591 mm (15.5 x 24.3 x 23.3 in.)
34 kg (75 lb)
Operating environment: Temperature of 5 to 40°C (41 to 104 °F), 35 to 80%
relative humidity (no condensation)
Ambient pollution degree: 3 (as specified by IEC 60664-1)
Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining
screw, spring), spare mounting screw (for the cutter holder), character cutter
(diameter 3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet
(diameter 3.175 mm), solid collet (diameter 4.36 mm), hexagonal wrench,
hexagonal screwdriver, handy panel, adhesive sheet, vacuum adapter for chip
cleaning, Roland Software Package CD-ROM, Roland EngraveStudio CD-ROM,
Roland Software Package SOFTWARE GUIDE, Roland EngraveStudio Software
Guide, and User's Manual (this document)
1) Model preinstalled with Windows XP/Vista/7 (32 bit edition/64 bit edition),
or upgraded computer originally preinstalled with Windows XP or later
2) Computers on which USB operation is assured by the manufacturer of
computers
Use a shielded cable up to three meters (10 ft.) in length.
8-4 Main Unit Specification
EGX-350
Chapter 8 Appendix
115