Expansion Connector - Roland EGX-350 User Manual

Expansion Connector

+24V
This circuit works during spindle motor rotation.
 Be sure to use the connector within the rated range
shown above.
 Do not apply an additional voltage to the con-
nector.
 Do not short-circuit the connector and earthing.
Note: We are not responsible for devices connected to this connector.
Pin 1 Connec- Pin 2
tor
Ic (max) = 100mA
8-3 Interface Specifications
Adaptive Plug
Use a three-contact plug that meets
the size requirements above.
Do not use the terminal 3. Use only the
1 and 2 terminals.
Chapter 8 Appendix
111