Specifications - Roland EGX-20 User Manual

Specifications

Main Unit Specifications
Table size
Table load weight
Carriage cutting range
C a r r i a g e o p e r a t i n g
speed
Cutting-depth control
Cuttable depth
Cuttable material
Resolution
Spindle motor
Spindle rotating speed
Overload detection fea-
ture
Cutter diameter
Interface
Buttons and controls
Indicators
Power supply
Power consumption
Operating noise level
External dimensions
Machine weight
Packed dimensions
Packed weight
Operating environment
Included items
Parallel Interface Specifications
Rating
Input signals
Output signals
Input/output signal level
Transmission method
220 (W) x 170 (D) mm (8-5/8 (W) x 6-11/16 (D) in.)
Maximum 1 kg (2.2 1b.)
203.2 (X) x 152.4 (Y) x 31.8 (Z) mm (8 (X) x 6 (Y) x 1-1/4 (Z) in.)
X and Y axes: 0.1 to 1 mm/s, 1 to 15 mm/s (0.0039 to 0.59 in./s)
Z axis: 0.1 to 1 mm/s, 1 to 6 mm/s (0.0039 to 0.23 in./s)
AST (Active Surface Tracking) system
3D Cutting mode: 0.05 to 7 mm (0.002 to 0.27 in.)
Engraving mode: 0.05 to 1 mm (0.002 to 0.039 in.)
Composition: Resin (acrylic, modeling wax, ABS, polyacetal, polycarbonate, styrenefoam,
etc.), wood, and plaster
Maximum thickness: 30 mm (1-1/8 in.)
0.01 mm/step (0.00039 in./step)
12 W (DC motor)
4,000 to 15,000 rpm
Yes
3.175 mm (1/8 in.)
Parallel (compliant with IEEE 1284)
Movement button (joystick type), Power button, View button, Origin Set button, Speed
control, and Spindle Speed control
Z-axis light, Power light, View light, and Origin Set light
Dedicated AC adapter
Input: AC 100 to 240 V ±10%, 50/60 Hz
Output: DC 19 V, 2.1 A
Maximum during operation: 0.6 A at 100 V, 0.27 A at 240 V
Standby: Less than 45 dB (A)
No-load operation: Less than 70 dB (A) (according to ISO 7779)
515.2 (W) x 368.3 (D) x 270.6 (H) mm (20-5/16 (W) x 14-1/2 (D) x 10-5/8 (H) in.)
10.9 kg (24 1b.)
673 (W) x 518 (D) x 412 (H) mm (26-1/2 (W) x 20-3/8 (D) x16-1/4 (H) in.)
15.5 kg (34.2 1b.)
Temperature: 5 to 40 ºC (41 to 104 ºF)
Relative humidity: 35 to 80% (no condensation)
AC adapter, power cord, cutter, cutter holder, nose cones (large, medium and small),
adhesive sheet, test-use plate material, hexagonal screwdriver, hexagonal wrenches
(large and small), Roland Software Package, User's Manual
Compliant with IEEE 1284: Nibble mode
STROBE (1 bit), DATA (8 bits), SLCT IN, AUTO FEED, and INIT
BUSY (1 bit), ACK (1 bit), FAULT, SLCT, and PERROR
TTL level
Asynchronous
7 Appendix 47