Main screen
Shutdown
Dark
When the screen shown in the figure at left appears after
approximately three seconds, press
The spindle head moves to a location on the inner-left side of the ma-
chine. This operation is called "initialization. "
The default for the language used for on-screen display is English. To
change the display language to Japanese, refer to the page indicated
below and change the language setting.
P. 33, "Selecting the Language Used for Text on the Display Screen"
When initialization ends, the screen changes to a display like that shown
at left (the mainscreen). This completes initialization.
Make sure the machine is not in oper-
ation, then turn off the power switch.
The display screen on the handy panel goes
OFF
dark.
3-2 Starting and Quitting
Chapter 3 Basic Operation
.
41