Specifications - Roland EGX-300 User Manual

2-12 Specifications

EGX-300
Table size 305 mm x 230 mm (12 in. x 9 in.)
Max. cutting area
305 mm (X) x 230 mm (Y) x 30 mm (Z) (12 in. (X) x 9 in. (Y) x 1.18 in. (Z))
Feed rate
X, Y-axis : Max. 3600 mm (141 in.) /min.
Software resolution 0.01 mm (0.00394 in.) /step or 0.025 mm (0.000984 in.) /step
Mechanical resolution X, Y and Z-axis : 0.00125 mm (0.0000492 in.) /step (micro-step control)
Spindle motor 30 W (DC motor)
Revolution speed
5,000 to 15,000 rpm
Tool chuck
Cutter holder and collet system
Interface Parallel (in compliance with the specification of Centronics)
Serial (under RS-232C standard)
Buffer size
1 MB (960 Kbyte for replot buffer)
Instruction system
CAMM-GL I (mode1, mode2)
Control keys
MENU, ENTER/PAUSE, SPINDLE TEST ON/OFF,
SPINDLE CONTROL, EMERGENCY STOP switch
Source 1.8 A / 117 V
Acoustic noise level
During no-load operation : 70 dB (A) or less
(According to ISO 7779)
External dimensions 598 mm (W) x 545 mm (D) x 357 mm (H) (23-9/16 in. (W) x 21-1/2 in. (D) x 14-1/16 in. (H))
When cover is open: 598 mm (W) x 545 mm (D) x 685 mm (H) (23-9/16 in. (W) x 21-1/2 in. (D) x 27 in. (H))
Weight
28.5 kg (62.8 lb.)
Operation temperature
5 to 40 C (41 to 104 F)
Operation humidity
35 to 80 % (no condensation)
Accessories Power cord: 1, Depth regulator nose: 1, Character cutter 3.175 mm (with Cutter Holder) : 1, Wrenches: 2,
Collet (for 4.36 mm) : 1, Collet (for 3.175 mm): 1,
Hexagonal screw driver: 1, Hexagonal wrench: 1, Spare tool securing screw: 1, Adhesive sheet: 1,
Clamps: 3, Vacuum adapter set: 1, Motor brushes : 2, User's manual: 1,
Roland Software Package CD-ROM: 1
Interface specification
[ Parallel ]
Standard In compliance with the specification of Centronics
Input signal STROBE (1BIT), DATA (8BIT)
Output signal
BUSY (1BIT), ACK (1BIT)
I/O signal level
TTL level
Transmission method Asynchronous
[ Serial ]
Standard
RS-232C specification
Transmission method
Asynchronous, duplex data transmission
Transmission speed
4800, 9600 (Selected using panel keys.)
Parity check Odd, Even, None (Selected using panel keys.)
Data bits 7 or 8 bits (Selected using panel keys.)
Stop bits
1 or 2 bits (Selected using panel keys.)
Z-axis : Max. 1800 mm (70.8 in.) /min.
0.9 A / 220 to 230 V 0.9 A / 230 to 240 V
Standby mode : 30 dB (A) or less
(XY axis only)
, , , , +Z, -Z,
Part 2
59