Main Specifications; System Requirements For Usb Connection - Roland EGX-350 User Manual

Main Specifications

Workpiece-table size
X, Y, and Z operation strokes
X-, Y-, and Z-axis drive system
Operating speed
Software resolution
Mechanical resolution
Spindle motor
Spindle speed
Tool chuck
Loadable workpiece thickness
Interface
Internal memory capacity
Control command set
Required power-supply amperage
Power consumption
Operating noise
External dimensions
Weight
Installation Environment
Included items

System Requirements for USB Connection

Computer
USB cable
Width x depth: 305 x 230 mm (12 x 9.1 in.)
X, Y, and Z: 305 x 230 x 40 mm (12 x 9.1 x 1.6 in.)
Stepping motor, 3-axis simultaneous control
X and Y axes: 0.1 to 60 mm/sec. (0.004 to 2.4 in./sec)
Z axis: 0.1 to 30 mm/sec. (0.004 to 1.2 in./sec)
0.01 mm/step or 0.025 mm/step (0.0004 in./step or 0.001 in./step)
X and Y axes: 0.0025 mm/step (0.0001 in./step)
Z axis: 0.00125 mm/step (0.0005 in./step)
brushless DC motor, maximum 50 W
5,000 to 20,000 rpm
Cutter holder, collet method
Maximum 40 mm (1.6 in.) (38 mm (1.5in.)when nose unit is used)
USB (compliant with Universal Serial Bus Specification Revision 1.1)
Serial (RS-232C-compliant)
2 MB
RML-1
Voltage and frequency: AC 100 to 120 V/220 to 240 V 10%, 50/60 Hz (overvolt-
age category II, IEC 60664-1)
Required power capacity: 1.3 A (100 to 120 V)/0.6 A (220 to 240 V)
122 W
During operation: 60 dB(A) or less (when not cutting), during standby: 40 dB(A) or
less (as specified by ISO 7779)
Height x width x depth: 393 x 616 x 591 mm (15.5 x 24.3 x 23.3 in.)
34 kg (75 lb)
Operating environment: Temperature of 5 to 40˚C (41 to 104 ˚F), 35 to 80% rela-
tive humidity (no condensation)
Ambient pollution degree: 3 (as specified by IEC 60664-1)
Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw,
spring), spare mounting screw (for the cutter holder), character cutter (diameter
3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet (diameter 3.175
mm), solid collet (diameter 4.36 mm), hexagonal wrench, hexagonal screwdriver,
handy panel, adhesive sheet, vacuum adapter for chip cleaning, Roland Software
Package CD-ROM, Roland EngraveStudio CD-ROM, Roland Software Package Pro-
gram Guide, Roland EngraveStudio Program Guide, and User's Manual (this docu-
ment)
Model preinstalled with Windows Vista, XP, 2000, Me or 98SE (Second Edition), or
upgraded computer originally preinstalled with Windows 98SE or later
Use a shielded cable up to three meters (10 ft.) in length.
8-4 Main Unit Specification
EGX-350
Chapter 8 Appendix 115