Canon iR1200 Series Service Manual page 485

*1: Service error code.
*2: START TIME; date and time (in 24-hr notation).
*3: OTHER PARTY; telephone number sent from other party.
*4: MAKER CODE; manufacture code.
*5: MACHINE CODE; model code.
*6: Bits 1 through 48 of received DIS, DCS, or DTC.
*7: Bits 1 through 48 of received DIS, DCS, or DTC.
*8: RX: received procedure signal.
TX: transmitted procedure signal.
A service error code list and an error dump list may be attached to the RX report in response to an error reception.
To attach, use SSSW-SW01 in service mode.
02/08/2001 19:29 FAX
**************************
***
**************************
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
TIME USE
PGS.
RESULT
*2
START TIME 02/08 19:28
*3
OTHER PARTY
*4
MAKER CODE 10001000
*5
MACHINE CODE 10011100 00000000
*6
Rx : (bit 1) 00000000 01110011 10011101 00100010 00000000 00000000 00000000 (bit56)
*7
Tx : (bit 1) 00000000 01100000 00011111 00100010 00000000 00000000 00000000 (bit56)
*8
Rx : NSS CSI DIS CFR
Tx : NSS DCS PIX PPS-EOP
***
ERROR TX REPORT
0004
12
02/08 19:28
01`31
0
*1
##0765
NG
12
PPR
PIX PPS-EOP PPS-EOP PPS-EOP DCN
F-15-33
Chapter 15
001
15-77