Canon iR1200 Series Service Manual page 151

[2]
F-6-19
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
To prevent damage to the flexible cable, be sure to lift
the control panel
disconnecting the connector [2].
[2]
F-6-20
MEMO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.
[1]
slightly as shown
[1]
6.2.4.4 Removing the Front
Cover
1) Remove the cassette.
when
2) Remove the screw [1].
3) Free the 5 hooks [2], and detach the front cover [3].
[1]
6.2.4.5 Removing the Toner
Bottle Sensor
1) Remove the screw [1], and detach the toner supply
cover open/closed detecting switch [2] from the
body.
2) Disconnect the connector [3].
3) Remove the 2 screws [4], and detach the unit [5].
Chapter 6
[2]
[1]
F-6-21
0006-2885
[2]
[3] [2]
F-6-22
0006-2886
6-7