Canon iR1200 Series Service Manual page 248

9.3.13.7 Removing the Rear
Cover
1) Remove the screw [1], and detach the left cover [2].
2) Remove the 13 screws [3], and detach the rear
cover [4].
[3]
[3]
[4]
[3]
F-9-109
9.3.13.8 Removing the Printer
Controller PCB
1) Disconnect the connector [1].
2) Remove the 5 screws [2], and detach the printer
controller PCB [3].
[1]
F-9-110
9.3.13.9 Removing the NCU
PCB (if equipped with fax
functions)
1) Disconnect all connectors form the NCU PCB.
2) Remove the 4 screws [2], and detach the NCU PCB
[1].
0006-3166
[1]
[2]
0006-3167
[2]
[3]
[2]
0006-3168
F-9-111
9.3.13.10 Removing
Modular Jack PCB
1) Disconnect the connector [1].
2) Remove the screw [2], and detach the modular jack
PCB [3].
[3]
[1]
F-9-112
9.3.13.11 Remove the Fan
1) Remove the 6 screws [1], and detach the plate [2].
Chapter 9
[2]
[1]
[2]
the
0006-3174
[2]
0006-2832
9-35