Canon iR1200 Series Service Manual page 441

[bit 0]
Use it to specify whether or not to reduce the received image of an extra-long original if it can be printed in divisions
after reducing to the maximum reduction ratio (70%).
prohibit:
select it to divide and print on the next page (Direct).
For instance, if an extra-length original as long as 2.5 A4R original is received, it will be
divided into 3 A4R sheets for printing; the image will be in Direct.
do not prohibit:
select it to print the image by reducing it to fit a single page (in divided print mode).
For instance, if an extra-length original as long as 2.5 A4R originals is received, it will be reduced to 70% to print
on 2 A4R sheets.
#7 PRINTER #1 SSSW-SW13 (humidity sensor fixed mode)
Bit
0
1
2
3
4
5
6
7
[bit 0, 1]
Use bits 0 and 1 to select humidity sensor fixed mode; the combinations of modes and bit SW settings are as follows:
Function
humidity sensor fixed mode
selected
not used
not used
not used
not used
not used
not used
T-15-30
1 0
1 0
1 0
- -
- -
- -
- -
- -
- -
Chapter 15
Factory
setting
0
0
-
-
-
-
-
-
15-33