Canon iR1200 Series Service Manual page 237

Chapter 9
9.3.9.3 Removing the Control
Panel
1) Slide the reader unit, and open the cartridge cover.
2) Remove the screw [1], and slide the control panel
[2] to the left.
[2]
F-9-63
3) Close the cartridge cover.
4) Disconnect the connector [2], and detach the
control panel [1].
To prevent damage to the flexible cable, be sure to lift
the control panel
disconnecting the connector [2].
[2]
F-9-64
MEMO:
To mount the control panel, turn it over as shown in
below figure, and connect the connector [1]; then, turn
back over [2] the control panel to facilitate the work.
9-24
0006-3216
[1]
slightly as shown
[1]
9.3.9.4 Removing the Front
Cover
1) Remove the cassette.
2) Remove the screw [1].
3) Free the 5 hooks [2], and detach the front cover [3].
when
[1]
9.3.9.5 Removing the Sensor
Relay PCB
1) Remove the 3 connectors [1]. Remove the sensor
relay PCB [2].
[2]
[1]
F-9-65
0006-3217
[2]
[3] [2]
F-9-66
0006-3219