Canon iR1200 Series Service Manual page 283

10.4.7.4 Removing the ADF
Drive Unit
1) Holding the tab [1], detach the white plate [2].
[1]
F-10-78
2) Remove the 4 screws [1], and detach the ADF drive
unit [2].
[1]
F-10-79
10.4.7.5 Removing the White
Roller
1) Remove the spring [1] and the hook [2].
F-10-80
0006-4045
[2]
[1] [2]
[1]
0006-4046
[2]
[1]
2) Remove the spring [1] and the hook [2], and detach
the white roller [3].
[2]
F-10-81
10.4.7.6 Removing the ADF
Motor Unit
1) Disconnect the 3 connectors [1].
2) Remove the E-ring [2] and the bushing [3].
3) Remove the 3 screws [4], and detach the ADF
motor unit [5].
The ADF motor is positioned using a special tool and,
therefore, cannot be adjusted in the field. Do not
remove the ADF motor from the motor base.
[1]
[2]
F-10-82
10.4.7.7
Removing
Separation Roller Unit
1) Remove the E-ring [1], gear [2], bushing[3], and
Chapter 10
[1]
[3]
0006-4047
[4] [3] [5]
[4]
[1]
the
0006-4051
10-23