Canon iR1200 Series Service Manual page 431

suspended.
[Bit 7]
Use it to specify whether or not to generate an error TX report when a transmission is suspended by pressing the Stop
key.
#1 SSSW-SW28: V.8/V.34 protocol settings
Bit
0
1
2
3
4
5
6
7
[Bit 0]
Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is inhibited at calling and the
V.21 protocol is used.
[Bit 1]
Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is inhibited when called and
the V.21 protocol is used.
[Bit 2]
If ANSam signal is not received during transmission (mainly manual transmission), select whether to use the V.8
protocol when the other fax machine declares the V.8 protocol in DIS signal. If NO is selected, the CI signal is not
transmitted and the V.8 protocol is not used even if the DIS that specifies the V.8 protocol is received.
[Bit 3]
Select whether to declare the V.8 protocol in DIS signal for reception (mainly caller manual transmission). If NO is
selected, the V.8 protocol cannot be used because it is not declared in DIS signal.
[Bit 4]
Function
Caller V.8 protocol
Called party V.8 protocol
Caller V.8 protocol late
start
Called party V.8 protocol
late start
V.34 reception fallback
V.34 transmission fallback
not used
not used
T-15-22
1 0
No Yes
No Yes
No Yes
No Yes
Prohibited Not
prohibited
Prohibited Not
prohibited
- -
- -
Chapter 15
Factory setting
0
0
0
0
0
0
15-23