Canon iR1200 Series Service Manual page 235

Chapter 9
[1]
[2]
[1]
F-9-55
11) Free the harness [1] from the harness guide [2].
12) Remove the 7 screws [3].
13) Remove the power supply unit [4] by moving,
with your finger, the hook of the guide used to route
the flexible cable between the sensor relay PCB and
the DC controller PCB.
[3]
[2]
[1]
[2]
[1]
[2]
F-9-56
14) Disconnect the 3 connectors [1].
15) Remove the 4 screws [2], and detach the DC
controller PCB [3].
9-22
[3]
[2] [4]
[3]
[3]
[2]
[3]
F-9-57
9.3.8.8 Removing the Power
Supply PCB
1) Remove the 5 screws [1], and detach the power
supply PCB [2].
[2]
[1]
F-9-58
When mounting the power supply unit, be sure not to
leave out the sensor flag [1] of the LGL paper sensor
from the rear of the sensor plate [2].
[1]
[2]
0006-3201
[1]
[1]