Canon iR1200 Series Service Manual page 26

Chapter 1
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
*1: If equipped with fax functions.
1-8
Start Key
Press it to start making a copy or sending a fax.
# Key
Press it to enter a "symbol"when registering fax/telephone number or
when entering a fax telephone number.
Keypad
Use it to enter a copy count or a value for Zoom, or when entering a fax
telephone number.
* Key
Press it to generate a tone signal from a dial (pulse) circuit when using a
fax function.
Right Arrow/+ Key
Press it to add a value when making various settings or to indicate the
next setting or an item.
Image Quality Key
Press it to select a copy image quality type (text, text/photo, photo).
Paper Select Key
Press it to select a source of paper (drawer (cassette), stack bypass
(manual feed)).
OK Key (Set Key*2)
Press it to store various selections or settings.
Exposure Key
Press it to change the copy density. (auto, or manual from 9 steps)
Enlarge/Reduce Key
Press it to select a default Enlarge/Reduce ratio or Zoom.
Left Arrow/- Key
Press it to subtract a value when making various settings or to indicate
the previous setting or an item.
One-Touch/Fax Function Key (after a press on the Function key)*1
Press it to dial a pre-registered telephone number. A press on the
Function key will cause it to serve as the Fax Function key.