Canon iR1200 Series Service Manual page 370

Chapter 14
#022 [TX]
Cause:
Remedy:
#025 [TX/RX]
Cause:
Remedy:
#037 [RX]
Cause:
Remedy:
#059 [TX]
Cause:
Remedy:
Cause:
Remedy:
14-14
T-14-17
Call fails
The data for an auto-dial number used when selecting a party was
deleted.
Register the telephone number of the other party as an auto-dial number,
and transmit once again.
T-14-18
Auto-dial setting is wrong
The settings require registration of a subaddress for auto-dialing;
however, a call was attempted without registering a subaddress.
If auto-dialing is of a type requiring registration of a subaddress,
register a subaddress.
T-14-19
Memory has overflowed when receiving images
The image memory overflowed during reception.
Delete image data that is no longer needed, and ask the operator of the
other party to transmit once again.
T-14-20
Dialed number and the connected number (CSI) do not
match
The user telephone number is not registered correctly on the receiving
side.
1. Ask the operator of the receiving side to register the user telephone
number correctly.
2. Use manual transmission; then, after making sure that a connection
has been made, transmit once again.
The exchange malfunctioned, and the machine is not connected to the
dialed party.
Have the exchange checked.