Canon iR1200 Series Service Manual page 417

#6 SCANNER
(scanner function
setting)
(printer function
setting)
MEMO:
To select the SW number in #1 SSSW of #7 PRINTER, use Paper Select key and Enlarge/Reduce key. To select a
bit, use the Left or Right Arrow key.
#6 SCANNER (scanner function setting);
The setting of this item can affect the read image quality. A change may be made to '7. CCD' when adjusting the
image position; otherwise, do not use this item.Do not change the settings, as they are not in use: #7 PRINTER
(printer function setting); #1 SSSW: SW01 through 05, 07 through 12, 14 though 20. Also, do not change the setting
of '#2 NUMBER Param'.
1. Bit SW
2. SLICE
3. GAMMA
4. Numeric
5. LUT 1 fno
6. LUT 2 adj
7. CCD
8. MODEL
#1 SSSW
#7 PRINTER
#2 NUMERIC Param
#3 PRINT COUNT
#4 PRINTER RESET
#5 MLT CLEANING
SW01 00000000 SW01 through 05: not used
SW05 10000000
SW06 00000100 reduction setting
SW07 00000000 not used
SW07 through 12: not
SW12 00000000 not used
SW13 00000000 humidity sensor fixed mode
SW14 00000000 not used
SW14 through 20: not
SW20 00000000 not used
YES= (<)
NO= (>)
not used
F-15-6
Chapter 15
15-9