Using A Nx-181Xx Voice Keypad; Using A Standard Keypad (Icon Or Lcd) - Interlogix NX-595E Installation Manual

Using a NX-181xx Voice keypad

Step Device Programming, Using NX-181xx Voice keypads
Example
1. [MENU]-[0]
2. [?]-[?]-[?]-[?] Enter your 4 or 6 digit Programming code
3. [ 2 ]
[ 1 ][ 9 ][ 1 ]
4.
[ENTER]
[ 9 ][ 1 ][ 0 ]
5.
[ENTER]
6. [MENU]
7. [MENU]
8. [MENU]

Using a Standard Keypad (Icon or LCD)

Step Device Programming, Using standard keypad
Example
1. [ * ] [ 8 ]
2. [?]-[?]-[?]-[?] Enter your 4 or 6 digit Programming code
3. [1][9][1] - [#]
4. [9][1][0] - [#]
5. [Exit]
6. [Exit]
18
Defaulting to factory settings
Selects main menu - Option 0, Advanced system
configuration

Enter your code, touch menu to exit.
Touch 1 for keypad configuration
Touch 2 for panel and device configuration

Touch 3 to configure service provider phone
number
Touch menu to exit.
Selects Panel and Device configuration
Select a device number followed by enter

Touch menu to go back.
Connects to device 191 (NX-595E)
Selected device 191 is connected

Select a Location number followed by enter
Touch menu to go back.
Defaults the device, Note: only required once
You are now ready to begin NX-595E programming
Moves back to step 4, select a device number
Moves back to step 3, Advanced system configuration
selection.
Exits from Advanced system configuration.
Defaulting to factory settings
Selects Panel and Device programming
Connects to device 191 (NX-595E)
Defaults the device, Note: only required once
You are now ready to begin NX-595E programming
Moves back to step 3
Exits programming
NX-595E Installation Manual