Table of Contents
Advertisement
Worksheets
Location 0 – Audio level adjustment for Outdoor Stations
The 2 segments in Location 0 are used to set the volume level to and from an
outdoor station.
Segment 1, controls the intercom volume level from the audio bus to an
outdoor station.
Segment 2, controls the intercom volume level from an outdoor station to the
audio bus.
Options are from 1 – 15.
Note: It may be necessary to adjust the NX-181xx microphone sensitivity
(found in the mute menu / option 9) depending on the selected setting in
segment 1.
Segments 1 - 2
12
Location 1 - NX-595E Features
Option 1 is used to set the zone-doubling feature. This feature will allow the
two onboard zones to double to four zones. Please refer to Location 18 for
starting zone number. If this feature is unselected, both onboard zones remain
as single end of line zones and require 3K3 resistors.
When Zone doubling is enabled:
Lower zones = 3K7
Higher zones = 6K9
Option 2. Answering machines usually answer calls after a long ring period.
This segment is used to set the answering machine defeat feature and enable
a connection to the NX-595E before the answering machine answers the
incoming call. When answering machine defeat is enabled, accessing the NX-
595E remotely is accomplished by calling the phone number the NX-595E is
connected to and allowing it to ring once or twice, then hanging up. Wait 10
seconds. Then calling back the NX-595E, which will now answer the next
incoming call. The second call must be made within 60 seconds of the first
call.
Segments 2 & 3 are reserved
Segment 1
(1)
Zone doubling
(2)
Answering machine defeat
(3)
Reserved
(4)
Reserved
(5)
Reserved
(6)
Reserved
(7)
Reserved
(8)
Reserved
Segment 2
Reserved
Segment 3
Reserved
38
15
NX-595E Installation Manual
Hide quick links:
Advertisement
Table of Contents
