Table of Contents
Advertisement
Location 21 - NX-595E IP Address
The 4 segments in Location 21 are used to set the IP address of the NX-595E so as it can be
identified on the network.
Segments 1 - 4
Location 22 - Subnet Mask
The 4 segments in Location 22 are used to set the Subnet mask.
Segments 1 - 4
Location 23 - DNS Server 1
The 4 segments in Location 23 are used to set the networks DNS server address.
Segments 1 - 4
Location 24 - DNS Server 2
The 4 segments in Location 24 are used to set the networks DNS server address.
Segments 1 - 4
Location 25 - UHS Client Server IP address
The 4 segments in Location 21 are used to set the IP address of the NX-595E so it can be
identified on the network by the UHS ultra agent. (Currently not supported)
Segments 1 - 4
Location 26 - UHS Client reporting selections
Event selection for UHS client reporting
Segment 1
(1)
Alarms
(2)
Alarm Restores
(3)
Open / Close (alarm system disarmed = Open, alarm system
armed = close.
(4)
Zone Bypass and restores
(5)
Zone Trouble and restores
(6)
Power Trouble and restores (AC Failure or Low Battery)
(7)
Tamper and restores (Zones, Box, Keypad and Zone Activity
Monitor)
(8)
Test Reports
Segment 2
(1)
System Trouble and restores (Siren, Phone, Expander, Short
Circuit)
(2)
Failure to Communicate
44
NX-595E Installation Manual
Hide quick links:
Advertisement
Table of Contents
