Panel And Device Configuration - Interlogix NX-595E Installation Manual

Panel and device configuration

This is the access point to program all other devices that are on the NetworX
bus, such as the control panel, radio receivers, output modules etc.
How to: Record an Exit message
To record a new eit message, from the Voice message
Step Example
recording menu
Call the NX-595E via an offsite touch-tone phone to begin
1. [PIN] 
the session.
Press [0] for system configuration menu
2.
Press [0] for panel and device configuration
3. Select a device number followed by #
Device ? Is now connected and you are now ready to
begin programming
st
1
nd
2
rd
3
4.
# Disconnects session
The above steps presumes you have exited any location
menus within the device you are connected.
NX-595E Installation Manual
star, moves back to panel and device configuration
star, moves back to system configuration menu
star, moves back to main menu
23