Table of Contents
Advertisement
Activation Event:
activate the corresponding relay
Activation Time:
Time the relay will be active, options 0 –255
Minutes:
On if output should be timed in minutes; off if timed in seconds
Latch:
On if output should latch; off if output should be timed.
Code Reset:
On if output should stop timing upon code entry; off if output should
follow timer.
Open Schedule:
On if output should only activate between the opening and
closing time
Close Schedule:
On if output should only activate between the closing and
opening time
Invert:
On if output should be inverted
Activation Partitions:
before the output will activate.
Schedule Times:
Sets the Opening / Closing hours and minutes (24 hour
format) and the days of the week the event must occur in before the output will
activate.
32
Select the required event from the drop down list that will
Is used to select the partition(s) the event must occur in
NX-595E Installation Manual
Hide quick links:
Advertisement
Table of Contents
