Using The Stack Bypass; Stackbypass Setting - Canon iR3530 Manual

Using the Stack Bypass

Reserved printing using the stack bypass is possible only if paper is being fed from the stack
bypass for the current job.
The following example assumes that A3 plain paper is being fed from the stack bypass for the
current job, and that you are selecting A4 plain paper to be fed from the stack bypass for a
reserved job.
NOTE
If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is set to
'On', reserved printing can be performed only for the registered paper size and type. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
1
Press [Paper Select] on the Change Print Settings screen ➞ press

[StackBypass Setting].

Normally, when reserved copying is not being set, the Stack Bypass Setting screen is
automatically displayed when paper is loaded into the stack bypass.
2
Select the desired paper size.
NOTE
• If you select [Envelope], [Tracing Paper], [Transparency], or [Labels], make sure that you do not
specify any Finisher modes (Collate, Group, or Staple).
• If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is
set to 'On', [StackBypass Setting] is grayed out. (See Chapter 4, "Customizing Settings," in the
Reference Guide.)
2-41
Reserving Jobs
2