Canon iR3530 Manual page 166

2
3
3-42
Collating Copies/Prints
NOTE
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to 'On', the Collate
or Offset Collate mode is automatically set when you place your originals in the feeder. (See
"Auto Collate," on p. 6-6.)
Press [Staple] ➞ [OK].
If the optional Finisher-S1 is attached
If the optional Finsher-S1 and Puncher Unit-Q1 are attached
If you want hole punches made, press [Hole Punch].
You cannot select the staple position.
The selected mode is set, and the display returns to the Copy Basic Features screen.