Scanning Two-Sided Originals - Canon iR3530 Manual

Scanning Two-Sided Originals

You can set the machine to automatically turn over two-sided originals that are placed in the
feeder, and scan each side separately.
IMPORTANT
• The 2-Sided Original mode is available only if the optional Feeder (DADF-N1) is attached.
• The 2-Sided Original mode cannot be used with the following mode(s).
3
- Mail Box: Two-page Separation, Image Combination
• When you are scanning originals with a horizontal (landscape) orientation, such as A4R or A5R, make
sure to place them horizontally in the feeder. If these originals are placed vertically, the back sides of the
originals are scanned upside down.
NOTE
The 2-Sided Original mode is available for the Mail Box function only.
1
2
3-56

Scanning Two-Sided Originals

Follow the procedure below to specify an inbox.
❑
Select the desired inbox number to display the Document Selection screen.
❑
Press [Scan].
If necessary, see the screen shots in steps 1 to 6 of "Storing Originals into an Inbox," on p.
2-9.
The Scan screen is displayed.
Place your originals in the feeder ➞ press [2-Sided Original].