Canon iR3530 Manual page 36

1
● To copy on envelope loaded in the stack bypass:
1-22
Paper Selection
IMPORTANT
• When printing on special types of paper, such as heavy paper or transparencies, be sure to
correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set
correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become
dirty, or the paper could jam, and a service repair may be needed.
• If you select a nonstandard size paper, Auto Zoom, Entire Image, Finisher mode, 1 2-Sided,
2 2-Sided, Book 2-Sided, Two-page Separation, Cover/Sheet Insertion, Image Combination,
Shift, Transparency Interleaving, or Image Repeat mode cannot be specified.
NOTE
For more information on paper types, see Chapter 2, "Basic Operations," in the Reference
Guide.
❑
Press [Stack Bypass].
If you want to select the stack bypass when a paper size/type is already selected for the
current or reserved job, press [StackBypass Setting] to specify the desired paper size/type.
❑
Press [Envelope].